1.Instructions: LTS ink applies to printing in PET film, transfer to frame, PVC buckle and other materials, can be high temperature transfer or low temperature transfer. 2.Product specifications: 1).Viscosity: Zahn - cup # 4 25±5 5 Degrees Celsius 15 "~ 25" 2). Fineness: 25UM below 3). Main solvents: esters, benzenes and alcohols According to the printing speed adjustment of solvent, solvent purity to more than 99.5% above can be used to. 4). The softening point of the ink at about 80 degrees Celsius 3.Characteristics: 1).LTS printing ink is good, suitable for 50 meters / minute to 150 meters / machine printing; 2).Ink heat resistance: 200 degrees 3kg pressure, 0.5 seconds do not change color; 3). In the plate light color ink ink requirements, the requirements are 13 red, 16 red, 18 red, yellow 22 yellow and 26 yellow, light level in 6 - 8. 4.Matters needing attention 1).Printing ink first shake evenly; 2).Used to cover tight lid; 3).Because LTS ink is relatively soft, so must have bake Road (for 5 meters or so), when the volume has cold air, to ensure that the ink will not stick; 4).Pay attention to test ink and form agent, close agent of solubility.